Moai User Guides and Links

Main user Guide:
https://peopoly.dozuki.com/Guide/Step+0+-+Start+Guide/1

Hardware Installation Manual:
https://drive.google.com/open?id=1yzSxYxJ2hDWH5Tks4eD-P5XpEBOaRhRxpic4mbyX3ks

Leveling
https://drive.google.com/open?id=1MeXCjGVIVvCN8XrciehLLfmdflCe3DazT6CqE1-7oew

Advanced Calibration Guide

https://docs.google.com/document/d/17EYM9WTy9HMLh6x3lLFIOnQ_dxqDnTRWgukOVBkIxvg/edit

firmware upgrade manual
https://peopoly.dozuki.com/Guide/Moai+-+Firmware+Upgrade/3

Print walkthrough:
https://peopoly.net/blogs/news/moai-work-flow-print-orientation

how to add support for printing:
https://www.youtube.com/watch?v=AZNsDMUgqWE

how to hollow object for printing:
https://www.youtube.com/watch?v=ZXu6VYj4Um0

How to restore Vat PDMS Coating
https://forum.peopoly.net/t/how-to-restore-your-vat/195

Community:

Facebook group:
https://www.facebook.com/groups/166212290569846/

Official discussion forum:
https://forum.peopoly.net

Moai printables add-on
https://www.thingiverse.com/groups/peopoly-moai/things

Applications:

Jewelry
https://forum.peopoly.net/t/show-us-your-bits/122

Troubleshooting:

FAQ:
https://peopoly.net/apps/help-center

Support section:
https://peopoly.net/pages/support

Test ring Gcode for checking printer
https://drive.google.com/open?id=0Bzke6lBHG_z5ajN6VU1scll6QTQ

Z-axis check to see if arm is wobbling
https://forum.peopoly.net/t/check-your-z-axis-screws-for-build-plate-arm/214

Cura fix for OSX user
https://forum.peopoly.net/t/solved-how-to-fix-lf-crlf-in-cura-mac-osx/362

Assembly Holes not tapped:
https://forum.peopoly.net/t/assembly-screw-holes-not-tapped/154/14