Adding New Printer Profiles
To add a new printer profile to MatterControl 2.0, navigate to the Hardware tab in the top of MatterControl and select either the Pulse [P] icon or the Plus [+] icon next to 'Printers' as shown below.
Select the Pulse [P] icon, then navigate the available Pulse models or type your model number into the sear bar. Select 'Next' to proceed to the Setup Wizard.
Follow the instructions in the Setup Wizard to connect your Pulse to MatterControl.
Navigate the menu of available printers or type in the search bar to locate your printer model, then select 'Next' to proceed to the Setup Wizard.
If creating a custom printer profile, be sure to select 'Define New' to enter your specific printer parameters.